top of page
  • Writer's pictureJordan Vermette

Raising the Foundations: A Step-by-Step Guide to Concrete Lifting for Older Homes

Are you looking for older homes restoration services? Then, you have come to the right place. Older homes have many concrete structures. However, as you may know, concrete can fall victim to many problems, including sinking and settling.

But did you know that there are also residential concrete solutions? Some easy tips can help you maintain your concrete structures stronger than ever. So, let’s look at the step-by-step concrete lifting guide to provide a clearer picture:

Using a Polyurethane Foam

Polyurethane foam injection is the most common technique used by professionals for concrete lifting. It is an effective method that works on almost every concrete problem. The best part is that it is very easy to use. It is also widely available in the market, making it a viable solution. So, let’s see how it works:

polyurethane foam injection

Step-by-Step Concrete Lifting with Polyurethane Foam

Follow the simple steps below for older home restoration with polyurethane foam injection:

1.    Drill Small Holes

The first step would be to drill holes in your concrete structure. Now, these holes don’t have to be big to affect the place’s aesthetics. You only need to drill 5/8" (coin-sized holes) in your concrete.

2.    Use a Pumping Machine

The pumping machine is filled with polyurethane foam. Its pump goes inside each drilled hole to release the foam.

3.    Grout the Patches

Now, you only have the drilled holes to worry about. After pumping, you can fill these holes with grout. It maintains the visual appeal of the house and protects the concrete from moisture.

4.    Wait for 15 Minutes

The best part about polyurethane foam is its quick results. You will start noticing the effects within 15 minutes. The foam starts hardening itself, making your concrete as strong as before.

residential concrete solutions

What to Know About Residential Concrete Solutions?

As easy as the above process may sound, it’s not suitable for everyone. Firstly, you might lack the equipment, like a pumping machine. Also, you wouldn’t know how to fill the holes with grout. Using polyurethane foam is another factor that only technicians know. Hence, you should let professionals handle this job.

Are you worried about the foundation repair cost MB? Well, this process is very cost-effective. DIY solutions tend to create more problems in the future. Experienced and skilled service providers, like Boost Concrete Lifting, inspect your area to determine the best solution. Also, their pricing is very reasonable, giving you peace of mind.

The Water Problem

Besides professional assistance, there’s one more thing to consider. Make sure the water stays far away from your concrete after it is fixed. You can install a downspout in your home to redirect the water. Otherwise, you can expect this problem again. That’s because moisture and concrete structures don’t go too well together.


It is safe to say that older homes restoration is more accessible and easier today than ever. You can contact a professional company, like Boost Concrete Lifting, and they can get the job done within a few minutes. Does it get any better?



bottom of page